dmay
Gold Member
With thanks to Kennyd's post and links provided here to posts from lt220, jimgerken and lincolnvt (thanks all for sharing your knowledge)
http://www.tractorbynet.com/forums/...it-selective-control-valve-2.html#post2263359
I am thinking to mount a valve oriented like this:
http://www.tractorbynet.com/forums/...-installing-2-spool-selective-control-051.jpg
With QC's directly attached similar to this:
http://www.tractorbynet.com/forums/...90482529-2520-rear-remotes-added-img_4790.jpg
Here is what I think _might_ be the correct parts list to order:
JOHN DEERE
PT13744 PB PLUG, QTY=1
SURPLUS CENTER
DSCV BLOCK, FRONT PORT
9-6805-6-6 SAE 6M TO 3/8" NPTF 90 ELBOW, QTY=1
DSCV BLOCK, REAR PORT
9-6901-6-6 SAE 6M TO 3/8" NPTF 90 SWIVEL, QTY=1
9-5503-6-63/8" NPTM TO 3/8" NPTF 45 ELBOW, QTY=1
PB HOSES
903-3836 3/8" X 36" 3/8 NPTM X 3/8 NPTM 2750 PSI HYD HOSE, QTY=2
9-A2-172-D 3/8 IN SINGLE WIRE DUAL HYDRAULIC HOSE CLAMP, QTY=1
2 SPOOL VALVE
9-7401 2 SPOOL COMPACT 10 GPM JOYSTICK CONTROL VALVE, QTY=1
VALVE INLET/OUTLET PORTS TO PB HOSES
9-6901-8-6 SAE 8M x 3/8 NPTF 90 SWIVEL, QTY=2
VALVE WORK PORTS TO DIRECT ATTACHED QUICK COUPLERS
9-6902-8-6 SAE 8M x 3/8 NPTF 45 SWIVEL, QTY=4
9-7184 3/8" NPTM - 3/8" NPTM HEX NIPPLE, QTY=4
9-7381-F 3/8 NPTF QUICK COUPLER, QTY=4
What do you think? Any changes/additions recommended?
http://www.tractorbynet.com/forums/...it-selective-control-valve-2.html#post2263359
I am thinking to mount a valve oriented like this:
http://www.tractorbynet.com/forums/...-installing-2-spool-selective-control-051.jpg
With QC's directly attached similar to this:
http://www.tractorbynet.com/forums/...90482529-2520-rear-remotes-added-img_4790.jpg
Here is what I think _might_ be the correct parts list to order:
JOHN DEERE
PT13744 PB PLUG, QTY=1
SURPLUS CENTER
DSCV BLOCK, FRONT PORT
9-6805-6-6 SAE 6M TO 3/8" NPTF 90 ELBOW, QTY=1
DSCV BLOCK, REAR PORT
9-6901-6-6 SAE 6M TO 3/8" NPTF 90 SWIVEL, QTY=1
9-5503-6-63/8" NPTM TO 3/8" NPTF 45 ELBOW, QTY=1
PB HOSES
903-3836 3/8" X 36" 3/8 NPTM X 3/8 NPTM 2750 PSI HYD HOSE, QTY=2
9-A2-172-D 3/8 IN SINGLE WIRE DUAL HYDRAULIC HOSE CLAMP, QTY=1
2 SPOOL VALVE
9-7401 2 SPOOL COMPACT 10 GPM JOYSTICK CONTROL VALVE, QTY=1
VALVE INLET/OUTLET PORTS TO PB HOSES
9-6901-8-6 SAE 8M x 3/8 NPTF 90 SWIVEL, QTY=2
VALVE WORK PORTS TO DIRECT ATTACHED QUICK COUPLERS
9-6902-8-6 SAE 8M x 3/8 NPTF 45 SWIVEL, QTY=4
9-7184 3/8" NPTM - 3/8" NPTM HEX NIPPLE, QTY=4
9-7381-F 3/8 NPTF QUICK COUPLER, QTY=4
What do you think? Any changes/additions recommended?