Dundonald
New member
My John Deere 4520 shut down while running mower with PTO. The engine will start but shuts down when gear engaged or PTO engaged. Provides Error Code nEutOF
My John Deere 4520 shut down while running mower with PTO. The engine will start but shuts down when gear engaged or PTO engaged. Provides Error Code nEutOF
I have a 4520 and this error code is not listed and it states to contack John deeere Dealer. I believe it got low in Transmission fluid due to a leak in a fitting some time recently and I did not check until I had the problem today. I have added transmission fluid and still have the same problem and I will contact the John Deere dealer tomorrow. When I find the answer I will post it for others. It is annoying that they will provide error codes without listing them in the operators manual.[/QUOTE
Each added on function will have more codes and I think this is basic tractor code listed.
Mine is a power reverser. open platform type if cab there would be more .
ken
The problem has been solved. There was a broken wire in the two wire harness running from the seat safety switch down the back and plugging into another harness. No explanation for this broken wire as it was about 2 feet away from seat and only discovered by opening up the plastic wire loom. Burr connected broken wire and all is well. Problem area discovered by tracing for continuity with ohmeter. Initially the friend who found the problem checked all connectors etc. and then followed the wiring....Eddie