DieselBound
Elite Member
In order to get more visibility with this issue -I have it noted in my thread about my tractor- I figured I'd start up a separate thread as I've heard from one other person having this same issue., and felt that others may want to look out for this issue.
As you can see in this picture, the loader arms set lower on the right side of the tractor. This is of my newly delivered NX5510CH with KL6010 loader:
The bucket is not resting on anything, nor is there anything in it. Even after sitting over night there is no change. When the tractor was loaded on to the truck (to return to the dealer's) I was able to watch the bucket lower on to the deck (I have very little in the way of a flat surface to check against), and the right side of the bucket clearly touched down what appeared to be a good 2" before the left side (loader was starting to push the tractor up a bit before the left side of the bucket touched the deck).
The tractor is back to the dealer's for this and a couple of other issues. They have another KL6010 that they have available for testing with.
As you can see in this picture, the loader arms set lower on the right side of the tractor. This is of my newly delivered NX5510CH with KL6010 loader:
The bucket is not resting on anything, nor is there anything in it. Even after sitting over night there is no change. When the tractor was loaded on to the truck (to return to the dealer's) I was able to watch the bucket lower on to the deck (I have very little in the way of a flat surface to check against), and the right side of the bucket clearly touched down what appeared to be a good 2" before the left side (loader was starting to push the tractor up a bit before the left side of the bucket touched the deck).
The tractor is back to the dealer's for this and a couple of other issues. They have another KL6010 that they have available for testing with.