kenmissouri
New member
I have a Kubota B2400 plagued by a clicking only solenoid. Checking voltage under load at the solenoid yeilded only 6 volts (barely enough but not to really engage it). I went to Auto Zone and got a 3.99 relay putting 12 VDC full thru the relay contact. I drive the relay coil off the wire that went to the solenoid. IT WORKS GOOD.
I also have a fuel problem where the tank sometimes starves the filter bowl. It is worse with a low tank. Blowing back thru the fuel tank helps. Any ideas? The tank is too hard to remove.
I also have a fuel problem where the tank sometimes starves the filter bowl. It is worse with a low tank. Blowing back thru the fuel tank helps. Any ideas? The tank is too hard to remove.