I think you did good. Last April I paid $21885 for a B2920/loader/BH (before tax) and suspect the somewhat rural area I live in accounted for the slight discount to what you paid. Heads up on a slight problem I had with the backhoe frame. The rear plates have holes in them to allow removal of the 3 point hitch; to take it off you slide the pivot pin to one side to remove one arm, and then repeat on the other side. The 3PH has to come off to mount the BH. But the hole on my plates didn't line up with the pin, they were off by almost 1.5". The dealer had to enlarge them for things to work...of source, if you never use the 3 PH this isn't a problem.