DGS
Silver Member
The LA211 loader lifts 211kgx2.2/lb=422lbs.
DGS
DGS
Kubota BX pallet forks
- Thread starter Just2quickz28
- Start date
OP
Just2quickz28
Gold Member
Yes but there are other loaders for the BX. LA 240 loader has these specs:
GENERAL INFORMATION
Manufacturer
Kubota
Model Year
2010
Model
LA240
DIMENSIONS
Bucket Width
48 in. (1,219 mm)
MEASUREMENTS
Lift Capacity
518 lbs. (235 kg) @ 19.7 in. forward
Lift Height
71.3 in. (1,811 mm) to bucket pivot pin
Reach Height
54.7 in. (1,389.4 mm) with attachment on ground
Dump Angle
45ｰ maximum
Attachment Rollback
29ｰ
Digging Depth
4.7 in. (119.4 mm) at bucket leveled
Operating Speed
2.9 sec. raising time to full height without load
2.9 sec. lowering time without load (powerdown)
tommu56
Elite Member
Just2quickz28
that is the link on youtube i wanted to post
I got all the steel except the latch stuff now i just have to get time to work on it.
I also scrounged up a side shift back plate and forks from a forklift for the fork build part
tom
that is the link on youtube i wanted to post
I got all the steel except the latch stuff now i just have to get time to work on it.
I also scrounged up a side shift back plate and forks from a forklift for the fork build part
tom
OP
Just2quickz28
Gold Member
Just got a quote for the micro max forks from an online dealer for 475$ plus 80$ shipping across the country from WA to RI.
So back to the original question. Has any one tried the pin on forks from everything attachments?
So back to the original question. Has any one tried the pin on forks from everything attachments?
jhloiac
New member
Had just purchased the Bxpanded Hooks and liked them. After a lot of research, decided to spend the extra $ on the pallet forks. The Clamp-on styles were cheaper but too big and heavy for what my 1870 could handle without stressing everything. Just received the forks. Well made and very easy to take on and off. Should suit my needs just fine. People have to realize these SCUT's aren't meant for those 42", heavy forks.