nightowl490
Bronze Member
GOT ONE FOR YA ALL..... I had to run over to my farmer friends house to pick up a 12" auger (It's a real meat hog!) It's about about a 6 mile trip in road gear, approximately 20 minutes. A little over halfway there, my hydrualic light comes on. I of course continue to my destination and everthing is fine. After hooking on and shutting off, I hang out and leave without a light coming on. Drive back, use the implement, and return, again, halfway there my light comes on. When I get there I have no FEL operation, even under RPM. If it does move it's jerky and RUFF! I then hook on a shredder to 3PT and cannot even lift it. WHAT IS HAPPENING????
I ended up parking it, letting it cool off and restart after a few hours. Light is still on but now everything works??????????????
Only 50 hours on complete fluid change including filters and plenty on the stick...
IS IT GETTING HOT AND THE OIL THINNING- Engine was never hot....
IS THE FILTER CLOGGED OR SOMETHING- Sometimes it works sometimes the light just comes on......
ANY RECCOMMENDATIONS.... I WAS THINKING JUST A FILTER CHANGE OR A COMPLETE FLUID/FILTER CHANGE.
USING udt, NOT KUBOTA, GOOD STUFF FROM A FARM & HOME STORE.
Tractor has 1750 hours on it and if you are using it without heavy RPM for easy tractor work it's a horse. If you run it in it's guts, the light comes on. Today is the first day it has done the hydraulic dance.
YOU GUYS ARE THE BOMB, I'M A HEAVY READER, LOOKING FORWARD TO HEARING FROM Ya'LL...
Thanks
I ended up parking it, letting it cool off and restart after a few hours. Light is still on but now everything works??????????????
Only 50 hours on complete fluid change including filters and plenty on the stick...
IS IT GETTING HOT AND THE OIL THINNING- Engine was never hot....
IS THE FILTER CLOGGED OR SOMETHING- Sometimes it works sometimes the light just comes on......
ANY RECCOMMENDATIONS.... I WAS THINKING JUST A FILTER CHANGE OR A COMPLETE FLUID/FILTER CHANGE.
USING udt, NOT KUBOTA, GOOD STUFF FROM A FARM & HOME STORE.
Tractor has 1750 hours on it and if you are using it without heavy RPM for easy tractor work it's a horse. If you run it in it's guts, the light comes on. Today is the first day it has done the hydraulic dance.
YOU GUYS ARE THE BOMB, I'M A HEAVY READER, LOOKING FORWARD TO HEARING FROM Ya'LL...
Thanks