Anonymous Poster
New member
- Joined
- Sep 27, 2005
- Messages
- 0
I have a B7500 and a Bush Hog 5' rotary cutter I use on my horse pasture. When I used the first time last weekend, I noticed that the right front of the bushhog was gouging the ground, especially when turning. No problem, I thought, just operator headspace and timing. A little experience would solve the problem... But yesterday, I noticed that the right side is a good 2 or 3 inches lower than the left side, which is probably why I digging the trench through the pasture. Now, my question is how do I adjust the 3 point hitch (or the bushhog) so that it's level? Any advice would be greatly appreciated. Thanks.