Feb 11, 2013 / Loader Bushings #1 V Vern Silver Member Joined Oct 30, 2002 Messages 118 Hi I pulled the bucket off my FEL, the bucket mounting holes are wallowed out so need to make some peices to fix it. Has anyone found a supplier for the wear bushings on the loader arm? Its a Yanmar 1575, Hoye does not carry them. Thanks
Hi I pulled the bucket off my FEL, the bucket mounting holes are wallowed out so need to make some peices to fix it. Has anyone found a supplier for the wear bushings on the loader arm? Its a Yanmar 1575, Hoye does not carry them. Thanks
Feb 11, 2013 / Loader Bushings #2 W winston1 Super Member Joined Dec 16, 2009 Messages 5,465 Location gilmer tx Tractor Bobcat CT235 You may have to go to MSC or some supplier of bushings. Might have to come up with your od and id sizes and sort of make your own.
You may have to go to MSC or some supplier of bushings. Might have to come up with your od and id sizes and sort of make your own.
Feb 11, 2013 / Loader Bushings #3 California Super Star Member Joined Jan 22, 2004 Messages 14,754 Location An hour north of San Francisco Tractor Yanmar YM240 Yanmar YM186D I assume reaming the holes straight takes specialized equipment. A local hydraulic shop might be able to refer you to someone local who can do that specialty.
I assume reaming the holes straight takes specialized equipment. A local hydraulic shop might be able to refer you to someone local who can do that specialty.