Xfaxman
Super Star Member
- Joined
- Feb 8, 2013
- Messages
- 12,924
- Location
- Guthrie, OK
- Tractor
- Toolcat 5610 G - Bobcat V417 - TORO+Loader
I recommend flare nut crowfoot wrenches, they get a better grip:
LS Grapple
- Thread starter bangthemup
- Start date
Bearsixty7
Veteran Member
Good to know. Those would have to be special ordered or from specialty store in Dallas maybe, the local Autozone or O'Reilly's just had the basic, regular ones, NAPA might have had them, they are a little further away but I didn't look.
I'm quite happy to have the basic ones, been a few times I thought they would have been handy. This time there was no other way.
Mrsig
Platinum Member
I had the dealer install my 60" grapple with the 3rd function kit I paid just under $1500.00 It has been great moving logs and cut up down tree trash and ripping up roots.
Mrsig
Platinum Member
I picked the Yitamotor 32" LED light bars, IP68 rated (Devices backed by an international standard rating of IP68 are deemed fit enough to withstand dust, dirt and sand, and are resistant to submersion up to a maximum depth of 1.5m underwater for up to thirty minutes ) with switch & harness. It has a 3 year Warranty. The only thing I had to do is extend the harness a few feet to mount on the ropes.
The price was great too. 32INCH 180W Led Light Bar Spot Flood Combo Boat Ford Offroad Truck UTE ATV 34'' | eBay
It makes the night look like day time using the backhoe in the rear or bucket or grapple in the front. Hope this helps.
The price was great too. 32INCH 180W Led Light Bar Spot Flood Combo Boat Ford Offroad Truck UTE ATV 34'' | eBay
It makes the night look like day time using the backhoe in the rear or bucket or grapple in the front. Hope this helps.
JCoastie
Platinum Member
Thanks, how did the mount work out around the ROPS?
Tarnold
Silver Member
I also went with the titan 2 lid for my 3038H. It really is too heavy. I can pick up a lot but have to carry it low. Instead of the looped rod provided by titan to keep the hoses up out of the way, I use a screen door spring with a caribeaner hooked to each end, yea I know.
neilkingent
Bronze Member
- Joined
- Jul 2, 2020
- Messages
- 54
- Tractor
- LS 4150
Armstrong Ag brush grapple
ZetorSteve
Silver Member
This is a mid state attachments grapple out of Denton, NC. It's not too bad in weight. 525# for a 68" unit. Built very well.
ZetorSteve
Silver Member
Made my own third function using one of my remotes for the circuits. It works extremely well. Built the brackets for the hoses to make it look as factory as possible.
