Chipper Machete Wood chipper

[arto98607]

Well, it’s been about 1yr since the last post.
And 13yrs since the first?
I bought a Machete chipper today for $150.
looks like it’s not been used much. But been sitting for many years.
i like fixing old attachments & i can really use a 3pt chipper.
I’m a machinist & welder, so that might help.
I’ll reply back when I get it in usable condition.
hope it won’t be in another year.
Cheers
EDIT: It looks identical to the photo in post #2

I think S&R Pro Chip which I have is very similar to Machete but it has some additions.

Here is my posting about a year ago:

S&R Pro Chip 2469P - knife sharpening

I bought this S&R chipper used back in 1998 and have been delaying knife sharpening for couple of years, due to reluctance of shipping them out to someone not having previously dealt with. Earlier this month I located what looks like very competent sharpening shop close-by and so far am very...

www.tractorbynet.com

I think Jinma knives will fit Machete & S&R Pro Chip, and may be the only ones readily available - in case you need new knives later.

 

[Mr. Orange]

Arto thanks for the reply, your posts & pics were a wealth of knowledge.
Basically your S&R does look like a dead ringer for the Machete.
I have a couple questions, I hope you won’t mind if I PM you. I promise not to be a pest
I used to be a member here but haven’t posted for so long I had to re-sign up as a new guy.??
Thanks, Steve aka Mr. Orange

 

[arto98607]

Steve,
No problem PM me and I will help best I can.