Hey Guys, I have an old Mc Cormick front end loader on my Oliver S77 and it won't raise it more then
2ft. off the ground. I checked the hydraulic pressure on the left and right side of the system. The pressure is less than 800 lbs. on each side. I put all new
seals in the cylinders and there is no cylinder to dump the bucket, it's a trip lever. How much hydraulic
pressure is required to operate an empty loader. The right side operates the 3 point hitch and it works
fine. Any suggestions would be appreciated. Thanks George
2ft. off the ground. I checked the hydraulic pressure on the left and right side of the system. The pressure is less than 800 lbs. on each side. I put all new
seals in the cylinders and there is no cylinder to dump the bucket, it's a trip lever. How much hydraulic
pressure is required to operate an empty loader. The right side operates the 3 point hitch and it works
fine. Any suggestions would be appreciated. Thanks George