McCormick 3 PT stuck

[kl9]

Pretty straightforward. I don't know a lot about tractors, but the 3 pt is stuck in the highest position (with an attachment on it so it isn't a weight issue). I believe there is plenty fluid in it. Any suggestions? Someone told me to change the hydraulic filter first. I hope it isn't the hydraulic pump.

 

[MHarryE]

Uncertain about your McCormick but most 3 points are gravity down, power up. I did say most, but not all. Most of ours do not even require the engine to be running to drop the 3 point. Two of ours, however, have electronic 3 point and need to have at least electric power to the control in order to drop, but at that point those 2 drop under gravity, not hydraulic power. Is yours electronic control or does it have a mechanical linkage to the control valve?

 

[kl9]

Good question. I'm not sure as I'm going to be borrowing the tractor from a friend. I could look more into that. If it isn't going down on its own I might be missing something from an electronics perspective?

 

[elbowroom]

Possible the needle valve to control the drop rate is screwed all the way in?

 

[DT86]

Any idea of the model number?

 

[kl9]

Any idea of the model number?

X10.50H

 

[DT86]

It appears the X10.50H is a Kioti DK500se in red. Maybe those guys can help.

Guys?

 

[kl9]

I figured it out. It was the needle valve being screwed all the way in.

 

[elbowroom]

Thanks for the update, easy fix!

 

[kl9]

Yes thank you!