lineman71
New member
I have been looking for a rebuild kit for the dual spool control valve on my 180. One of the levers is stuck so something inside jacked up. I've been all over the web and can't seem to find one, unless I'm reading something wrong. The only thing I can find is a complete kit to add a control valve to a tractor without one. Comes with valve block hoses levers fittings quick disconnects and everything I don't need. It appears that the valve block is the same as a 165 or 175? But there is a difference in the control levers. The 180 has a different end cover that allows the control levers to come out of the side so they are to the right of you when sitting on the tractor.The others have the levers coming out of the front of the end cover so when sitting on the tractor they are between your legs. The main part of the block is the same though. So can these end covers and control levers be swapped out between the two valve blocks? Because I found one for sale that is off a 175 with levers in between legs or front of block. Has anybody rebuilt one of these or know anything about them? Where can I finds rebuild kit? Thanks for reading and helping.