ey everyone, I havent posted on here in about 6 months or so. Ive been playing around with the free MT372 I picked up before Christmas last year.
Ive put about 30 hours on it, and I have some questions.
It runs bad and has no power above about 2400 rpms. If I go to mow (50" Haban Belly mower) and I engage the deck, and move it to 2700 to cut, it starts spitting out some white smoke, and sounds like its missing or floating the valves.
Engine doesnt have 400 hours on it yet, and starts easily, even in the cold. Fuel is fresh, tank is clean, filter could be better...but it flows, and Ive bled the lines dozens of times. One never has any bubbles, and one has a few very very tiny bubbles when I crack the fitting at the injector. The re are no leaks or wet spots on or around the pump, or any of the fittings or lines.
Any suggestions?
Ive put about 30 hours on it, and I have some questions.
It runs bad and has no power above about 2400 rpms. If I go to mow (50" Haban Belly mower) and I engage the deck, and move it to 2700 to cut, it starts spitting out some white smoke, and sounds like its missing or floating the valves.
Engine doesnt have 400 hours on it yet, and starts easily, even in the cold. Fuel is fresh, tank is clean, filter could be better...but it flows, and Ive bled the lines dozens of times. One never has any bubbles, and one has a few very very tiny bubbles when I crack the fitting at the injector. The re are no leaks or wet spots on or around the pump, or any of the fittings or lines.
Any suggestions?