Bubba, I'm in the Moncton area, pretty much the other end of the province.
Kiotimiike, the first time I mounted everything it took me about 30 minutes, and that includes the subframe and running to the shed for some tools. Now that I figured out that you need to pin the rear of the subframe first before the front I can probably have it all connected in 15 minutes by myself, 10 minutes if I have someone in the cab running the hydraulics. The blower itself it pretty simple, drive up to it, lift it up, insert a retaining pin on each side and connect the PTO shaft.
If you're in the same general area as me then you probably got that heavy wet snowfall about 2 weeks ago too. With this blower I was able clear the tops of the trees with that cement so I'm pretty happy with it's performance. I angled the shoot down a couple notches after that and I blow the snow about 30' away if I'm out in the open.
If you're in the Moncton area and would like to take a look at the setup send me a PM.
Jason