GRUMPA
Gold Member
Now before I start let me WARN you right at the beginning that I know precisely ZILTCH about hydraulics. I have a 35hp machine (Kama) that I would very much like to add remotes to. I've been touring thru here and doing massive google searches and coming up on the short side. I've been looking for kits, how-to's and the like.
I posted this same question in the chinese tractor forum without any real good results. It seems if someone did do this they are keeping it to themselves and info is very limited at best. All I would like to do is add this to my machine for 3 point implements. I have no idea about open or closed circuits, I know I have metric hardware on it, I know I need to T-off from the FEL line because I havent any extra ports on the pump.
I was told that a 2 way valve is what I would more than likely want to put on but being totally unknowledgable about them when I do a search on them there's more of them out there than you can shake a stick at. Being a machinist by trade you would think I would know more about this type of thing, but tractors, welding and such I'm not good at.
I would very much like to know the best way to go about this, and dont forget its like talking to kid here, its going to take some time for it to sink into the grey matter. /forums/images/graemlins/confused.gif
I posted this same question in the chinese tractor forum without any real good results. It seems if someone did do this they are keeping it to themselves and info is very limited at best. All I would like to do is add this to my machine for 3 point implements. I have no idea about open or closed circuits, I know I have metric hardware on it, I know I need to T-off from the FEL line because I havent any extra ports on the pump.
I was told that a 2 way valve is what I would more than likely want to put on but being totally unknowledgable about them when I do a search on them there's more of them out there than you can shake a stick at. Being a machinist by trade you would think I would know more about this type of thing, but tractors, welding and such I'm not good at.
I would very much like to know the best way to go about this, and dont forget its like talking to kid here, its going to take some time for it to sink into the grey matter. /forums/images/graemlins/confused.gif