gtrgarden1
New member
- Joined
- Sep 21, 2009
- Messages
- 11
It's time to replace the Belt on my MacKissic TPH-122 Chipper/Shredder... and that seems to be a tough item to find.
I can get the belt from MacKissic, but their shipped price is around $85... so I hoped to find some recommendations of other sources to possibly find a better price on that part.
Apparently, the DR chipper uses the same belt.
From the MacKissic manual, DR manual, and online research, I have seen the belt labeled in the following ways:
2/3VX530
3VX530 Two Groove
2/3VX530 (108252)
030-0330 ... DR part number
PIX Xtra 2H 3VX530
Apparently, the 3VX530 belts are found with a varied number of bands, from a single (3VX530) up to 12 bands (12/3VX530).
For the chipper, it is important to get the TWO-BAND version on the belt... 2/3VX530.
Also, the belt must have the "X" specification; as a "3V530" (without the X) is a different item.
Any tips for sources to find that belt will be greatly appreciated.
I can get the belt from MacKissic, but their shipped price is around $85... so I hoped to find some recommendations of other sources to possibly find a better price on that part.
Apparently, the DR chipper uses the same belt.
From the MacKissic manual, DR manual, and online research, I have seen the belt labeled in the following ways:
2/3VX530
3VX530 Two Groove
2/3VX530 (108252)
030-0330 ... DR part number
PIX Xtra 2H 3VX530
Apparently, the 3VX530 belts are found with a varied number of bands, from a single (3VX530) up to 12 bands (12/3VX530).
For the chipper, it is important to get the TWO-BAND version on the belt... 2/3VX530.
Also, the belt must have the "X" specification; as a "3V530" (without the X) is a different item.
Any tips for sources to find that belt will be greatly appreciated.