portable winch

[cmkh3]

Has anyone mounted a portable winch on a Mahindra 28 xl hydro? I would like to have one that I can hang on the front or back as needed if it gets stuck in a "hairy" situation. When doing land cleanup on our 2.5 acre hill side property I tend to do that.
Thanks
Chris

 

[skyhook]

I'll be installing a winch on mine also, in the near future.
My guess would be to install it somewhere at the rear,
simply because you usually drive forward into a "hairy" situation
and will need to pull yourself "back" out.
Also, I would think, the lower it is, the better,
so somewhere at the back and as low as possible is my thought.

 

[jwmorris]

Add a 2" reciever to the front and one at the rear. Mount the winch to a plate that can be moved to either location on your tractor oryour truck...

 

[BHD]

I made a winch that was three point mounted,

 

[JRP]

Mine is lower capacity, but useful to pull my windmill pump. It als works good for pulling bushes in landscape. It fits in a receiver welded to the bucket.

 

[skyhook]

I made a winch that was three point mounted,

Too small, lol

 

[sldva00]

I have a this



mounting on this




Winch works great, also have front and back receiver on my truck. It does come in quite handy.

 

[Xfaxman]

I have the same winch.


Welded a receiver hitch onto the front weight.


Used it many times, back when I had the tractor.


Sold the tractor, kept the winch.

 

[PILOON]

I have the same winch.
View attachment 378625

Welded a receiver hitch onto the front weight.
View attachment 378626



Used it many times, back when I had the tractor.
View attachment 378627 View attachment 378628 View attachment 378629 View attachment 378630

Sold the tractor, kept the winch.
View attachment 378679 View attachment 378680 View attachment 378681

I also did a very close copy on my MT180D at the rear. Very useful to drag trees out.

 

[Xfaxman]

I also did a very close copy on my MT180D at the rear. Very useful to drag trees out.

Yep, now I can do the same with my V417 :thumbsup:


And on the front in this three point receiver hitch if I need it there.