Sheepdr
Bronze Member
I put a 3pt hitch set up on an old int mower. The pto shaft is way to short and has been welded before at the u joints on both ends. Not a good weld. Going to need new ends. The mower won't move in and out very much. The question is how much play do I need so I can hook it up and tilt the mower a little? The length from mower ujoint to the slot on the tractor pto is 28" total. I don't know why I mentioned this but maybe there's a formula or something. I'm thinking if I cut 3" off each end that should work. Please let me know if I'm wrong. Like always time to cut is not that far away.
Sheepdr
Sheepdr