Pulling engines with a boom pole

   / Pulling engines with a boom pole #22  
On most other cars and trucks I would agree. But the "CJ" series front end comes off so easy. The CJ5 I used to have was a short fender '70. It had nine bolts holding it on, and a few wires. I could lift the front end off by myself. Mosey's will have a couple extra bolts for the battery tray, a few more wires, and is a little heavier, what with the long fender I-6 congiuration.

Removing the radiator is sufficient, but it is soooo much easier with the front end just set to the side.
 
 

Tractor & Equipment Auctions

UNUSED FUTURE SGB20 20" HYD STUMP GRAB BUCKET (A57193)
UNUSED FUTURE...
2009 Chevrolet Cobalt Sedan (A55758)
2009 Chevrolet...
1996 International Water Truck with a Caterpillar Engine (A55315)
1996 International...
2016 Ford F-450 Cab and Chassis Truck (A51692)
2016 Ford F-450...
16ft T/A Flatbed Trailer (A55758)
16ft T/A Flatbed...
2015 Peterbilt 320 T/A EZ-Pack Front Loader Garbage Truck (A51692)
2015 Peterbilt 320...
 
Top