tamarack
Member
I plan on filling the tires on my tractor and the Rim Guard website does not list this particular tire. Wondering if anyone has filled this size tire and if so, can they advise the amount of fluid that was required? Thanks
Tires Rimguard required for R4 12.4-16 tires
- Thread starter tamarack
- Start date
RFB
Platinum Member
Tamarack,
Call Les Schwab. They carry and install Rim Guard (at least the store in Weiser ID does).
They will look it up and give you the amount and a price estimate.
Call Les Schwab. They carry and install Rim Guard (at least the store in Weiser ID does).
They will look it up and give you the amount and a price estimate.
ChuckinNH
Elite Member, R.I.P.
- Joined
- Jun 23, 2003
- Messages
- 3,075
- Location
- NH
- Tractor
- (B2620, had BX22) Simplicity Legacy w/48" mmm
Hopefully, I can upload this chart.. Well, that didn't work, but a chart I found said that a 12.4 -16 would hold 21 gallons of water 75% full and add 175 lbs of weight. I googled "liquid ballast in tire" to find the very complete chart.
sunnyside360
Veteran Member
- Joined
- Aug 8, 2006
- Messages
- 1,565
- Location
- Central PA
- Tractor
- JD 3720, JD 4320, JD 835R, Kubota M4D-071, Kubota ZD1511
Your tire is listed here.tamarack said:
http://www.goodyear.ca/tires/farm/pdf/GoodyearFarmHandbook.pdf
OP
tamarack
Member
Thanks for the help RFD and ChuckinNH. I checked the chart that you referred to and while they list a 12.4-16 R1 tire, they don't list a R4, but I would guess that the R4's would hold around 25 gallons. Thanks again