Shhop Manual for a FL 850 Tiller

[Jimmyp5]

Hey, does anyone know where I can get a shop manual for a FL 850 Tiller.

I have the parts and owner manual. I need to replace the front seal and would like a copy of the manual so I don't do something stupid!!

I checked the Internet and can't seem to find it at the normal places.

Thanks!

Sorry for the typo in the heading...

 

[wushaw]

If you can see the seal then it shouldn't be too hard to remove the PTO shaft and pop out the old seal and tap a new one in.

 

[Jimmyp5]

The seal is only the start. I want to take the pto drive shaft off and have a machine shop install a adapter that allows me to go to the 1 3/8 normal quick disconnect... I found an adapter that converts the 21 spline into the standard but it needs to be pined in place, so it will take a machine shop to drill it out.