bill ns
Bronze Member
- Joined
- Jan 8, 2009
- Messages
- 60
- Location
- parrsboro nova scotia canada
- Tractor
- 1970 ,276 International Harvester2008 dk 35 kioti, 1957 cockshutt540
I just brought home a 4x4 Massey Ferguson Baler 1744 It was setting out in a guys field for a couple of years It never had a lot of bales through it 1650 on the counter .The deal is i get it running and make him a offer . So far i replaced the fuses in the control box and one lift cylinder hose has a pin hole in it were it was rubbing on the frame Every thing seams to work . My question is I own a square baler and have a understanding of the twine process but i cant figure it out on this machine The arm works and the twine is threaded but i cant figure out how it attaches itself to the bale or how it is cut when finished wrapping the twine on the bale
I also could not find a owners manual online only the AGRO parts book
Any help would be appreciated
I also could not find a owners manual online only the AGRO parts book
Any help would be appreciated