Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,238
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
looks like one end of that draft cam is threaded.
I know on a ford, we have a cam and a follower pin, and one or both can wear .. so check wear on your cam while you have it all apart.
I know on a ford, we have a cam and a follower pin, and one or both can wear .. so check wear on your cam while you have it all apart.