Flatheadyoungin
Veteran Member
well, i think i fixed her....
i took the plastic cover off and was inspecting the heim joints on the control.......one looked bent......so, i took it out of the link and the other two worked smoothly and the one i removed couldn't be moved by hand....
i came in and looked up the part #......called both my local dealers (both 355-45 mintues away) and both didn't have it (didn't really expect them to, just hoping) and both wanted $25 and could have it by friday or so.......and, i'd have to drive to get it......
i called messick's and their computer system was being updated, call back tomorrow.....
i looked at it closely and thought, if i put that in a vise and hit it just right with a dead blow hammer, i may just put it back where it was.......sure enough, about 5 good hit and she was free again.......some white lithium grease and put it back together....
i feel better, i was thinking i really messed up some seals or something inside the vavle body.....
thanks for all the help!
i took the plastic cover off and was inspecting the heim joints on the control.......one looked bent......so, i took it out of the link and the other two worked smoothly and the one i removed couldn't be moved by hand....
i came in and looked up the part #......called both my local dealers (both 355-45 mintues away) and both didn't have it (didn't really expect them to, just hoping) and both wanted $25 and could have it by friday or so.......and, i'd have to drive to get it......
i called messick's and their computer system was being updated, call back tomorrow.....
i looked at it closely and thought, if i put that in a vise and hit it just right with a dead blow hammer, i may just put it back where it was.......sure enough, about 5 good hit and she was free again.......some white lithium grease and put it back together....
i feel better, i was thinking i really messed up some seals or something inside the vavle body.....
thanks for all the help!