lewis@diviresorts.com
New member
- Joined
- Nov 29, 2006
- Messages
- 10
Does anyone have any thoughts on the tension on the bale/flight chain (not the drive chain)? The manual says to keep it tight so it doesn't catch on the boot (which they don't define), or "hump" the sprocket. from the underside, it would seem to take a lot of tension to prevent the chain from falling down to the bottom side of the trough (as the chain and flights return to the bottom of the elevator on the back side). The elevator is probably 30 years old and rusty at the bottom anyway and I'm a little concerned about put to much tension on the flight chain.
Thanks for the help.
Thanks for the help.