Ted Summey
Platinum Member
- Joined
- Feb 22, 2012
- Messages
- 729
- Location
- Germanton, NC
- Tractor
- Kubota MX5100F IH McCormick Farmall 140, Massey Ferguson 135
I checked with my dealer. He advised to stick with the 20" on the 455 and recommended a 372 for a longer bar. Since this as big as I will likely cut, I will stick with the 20". If I need something bigger cut, the service man at the hardware store is for hire and has a couple of 28" saws.
You have to be careful running larger than recommended bars on saws. Too big and it won't get oiled properly even with the oiler turned up all the way.