Yep, the spacer fit nice and snug to the axle flange like it should and the wheel center fit over the lip on the spacer nice and snug like it should as well. All the holes lined up right and everything went together as it should.
I did use blue loctite on the bolts that bolt the spacer to the axle flange and torqued them to 120 #/ft. I didn't want to worry about them working loose cause you can't see them once the wheel is on and you wouldn't know it until it was too late likely.
I did not use loctite on the bolts that bolt the wheel to the spacers as the spacers are aluminum and I don't like loctite in aluminum. I torqued those to 120 #/ft as well.
The spacers came with all the hardware needed, which all worked out as it should. I chose to reuse 4 of the stock bolts instead of the black bolts that came with the spacers to keep it looking close to factory, they match the bolts on the front wheels.
...
I did use blue loctite on the bolts that bolt the spacer to the axle flange and torqued them to 120 #/ft. I didn't want to worry about them working loose cause you can't see them once the wheel is on and you wouldn't know it until it was too late likely.
I did not use loctite on the bolts that bolt the wheel to the spacers as the spacers are aluminum and I don't like loctite in aluminum. I torqued those to 120 #/ft as well.
The spacers came with all the hardware needed, which all worked out as it should. I chose to reuse 4 of the stock bolts instead of the black bolts that came with the spacers to keep it looking close to factory, they match the bolts on the front wheels.
...