ArmyDoc
Silver Member
Thanks. That's a good idea, I'll try that.You are correct on pressure and flow. I would assume flow is proportional to rpm more or less. Things definitely move faster when you raise the rpm. Maybe I could time a cycle with the boom from ground to fully raised to estimate flow at idle vs max rpm
The reason I asked is that I am getting into forging. Everyone seems to be making forging presses and putting in a hydraulic pump, reservoir etc. I thought to myself, "Self, that's a waste of money. You have a much better pump. Just hook it up to the v519." So now I'm doing some research on that. But there is very little useful info on the Bobcat website....