I got a 5' fail mower from them a couple of years ago ,and have had a few problems with it . First of all the lowest sitting on the adjustment would not line up on the skids ,so i had to grind some off to get it to line up. The roller on the back that it rides on broke on one side next to the outer bearing ,which I had to get welded so I did both side . The seal around the shaft is leaking and that happened only after i'd mowed my field once(8 acre ) not enough to tear apart yet I just keep an eye on it . The blades where not hardened steel so they bend and wear more . I guess what they say rings true "You get what you pay for" ,but sometimes that's all you can do. I found out that it pays to research , research ,research then do it again, good luck and if you get it, let us know what you think of it.