jesnic
Bronze Member
While bush hogging last weekend, the clutch let go on the Belarus. I also bent the tie rod on the yanmar. So I used the Yanmar 3 point hitch to hook to the Belarus and used a very long steel bar to lock to the draw bar on the yanmar in order to make it ride a wheelie and pull the Belarus out of the field so as not to do any more damage to the front tie rod and wheel spindles on the yanmar. I used the yanmar to load the belarus on the trailer, then drove the yanmar on behind the belarus. We drove the 4 hrs home and I removed the tie rod on the yanny. I ordered one from Hoye and replaced it on friday. Then took the trailer to a friend's house and unloaded the tractors and used the yanny to pull the belarus into the carport. We slpit the belarus in about 3 hours. I think my friend has ordered the clutch pressure plate assy. When it arrives, we will install, and take em back to finish the food plots. I believe we will remove the flywheel and have it turned as well. We have had fun doing the split, but I don't why it costs so much to do it at a shop. It isn't that difficult.