California
Super Star Member
- Joined
- Jan 22, 2004
- Messages
- 14,692
- Location
- An hour north of San Francisco
- Tractor
- Yanmar YM240 Yanmar YM186D
I found a pair of cast iron wheel weights on Craigslist. 75 lbs each, 15 inch diameter. Application unknown.
He wanted $20 for the pair. I'm too cheap to pass that up.
They are a good fit on the YM186D, after I removed some metal to let the valve stem pass by without touching. I also added 45 degree valve stem extensions to get the caps out where I can reach them.
This added weight makes it possible to run in 2wd nearly all the time, even most of the time with my 2200 lb watering trailer. Highly recommended!
He wanted $20 for the pair. I'm too cheap to pass that up.
They are a good fit on the YM186D, after I removed some metal to let the valve stem pass by without touching. I also added 45 degree valve stem extensions to get the caps out where I can reach them.
This added weight makes it possible to run in 2wd nearly all the time, even most of the time with my 2200 lb watering trailer. Highly recommended!