I got into somethin a little deeper today than I started out too! I had pulled the bucket off of my 7310 Loader. Before I put it back I decided to touch up some paint on the loader itself. I could see it had been repainted and one paint did not like the other paint. There was scale everywhere down the arms of the lift. So while cleaning up rust and hitting the bald spots with primer. I decided to attack the scale as well. Before I was done and down to a paintable surface I had gone thru the new stencils over the old stencils they had painted over. Not to mention someone had stood on the hood of the 3930 tractor and then put about 3/8" of bond in an attempt to make up the dent. For God's sake if your gonna fix it do it right. Pull the hood and straighten it! The Bondo was cracking and what I thought was another paint fracture, was cracking Bondo. So I got most of the Bondo off and now need to pull the hood and straighten it!! Which will require pulling the exhaust stack. Not an easy fix but a doable fix!!!
So to make a long story short I need new stencils that depict the 7310 loader as a 7310 loader. This pic is not my tractor I just borrowed the image to show what I meant by the stenciling!
So either I am not Googling the right thing by putting in the search "stencils for a 7310 Ford/New Holland Loader" or something because, I have not found a site.
So where do I need to go to find the replacement stencils!!
So either I am not Googling the right thing by putting in the search "stencils for a 7310 Ford/New Holland Loader" or something because, I have not found a site.
So where do I need to go to find the replacement stencils!!