I figured that bigger numbers meant more lift power but the LA514 lifts more than the LA524
Also will the LA724 fit on the L3800 or is the LA524 with biggest that will fit
The 514 will fit the GL tractors which are heavier hence more lift. And no the 724 will only fit the GL tractors
You of course can bump up the pressure and get the same lift as the 514 but you didn't read it here.
I thought that the LA 524 is the same thing as the LA 463 but that they started to measure, and thus label the loader, based on another measurement. (not sure what that is) Bottom line is that the LA 524 = La 463. Please correct me if I'm wrong!
Also, any larger loader and you may have problems with the front axle... I bumped up my pressure to compensate for the grapple and tooth bar but was warned about going over board...
I know i didnt read that hear but if i was to hear it somewhere, where would i turn up the pressure
I thought that the LA 524 is the same thing as the LA 463 but that they started to measure, and thus label the loader, based on another measurement. (not sure what that is) Bottom line is that the LA 524 = La 463. Please correct me if I'm wrong!
Also, any larger loader and you may have problems with the front axle... I bumped up my pressure to compensate for the grapple and tooth bar but was warned about going over board...