I want to get chains for my 27x8.5-15nhs tires. I can find 4 linik and 2 link but I really want dual link without spending $400 or more. I want chains on the front industrial tires and I wonder if anyone has run 2 link on the front?
I run DUO's on my DK35's rear 43x16-20 tires with 2-link ladders on the fronts.
My fronts are 27x10-15 compared to your 25x8.50-14. I think the DUO's might be hard to fit and very rough for such small tires. However, there may be some less heavy-duty DUO's available(my rear chains are 9mm) for smaller tires.
I use smaller diameter regular 2-link ladder chains which work well and are cheaper. They also are less aggressive and don't put as much strain on the front end.
I modified an old set of chains as shown in this thread:
http://www.tractorbynet.com/forums/...nly-front-chains-post3135822.html#post3135822
Here's a photo of the fronts:
View attachment 408767
Have you read this thread? http://www.tractorbynet.com/forums/snow-removal/193438-cutting-groving-siping-r-4-a.html...Spinning around on my driveway today was bad, gotta do something quickly
Nice mods on the chains. I致e been to tirechins.com and lots of others via goggle but I can only find two or four link. I did find a nice set of rud Olympia sprints in my size but they are for a truck. Anyone know the difference? I might just end up with two link and try them. As was said in that thread I should really chain all 4 to avoid damage. Spinning around on my driveway today was bad, gotta do something quickly