When I have an implement on the 3 point, the tractor will lift it great (@ idle) before it warms up. Once the tractor gets warmed up, I have to increase the rpms to get the implement to raise...

Hi All, I wanted to thank everyone for all the help I have received on this site. I have never owned a tractor before and I was able to get most of the information I need on this site and plan...

Ford 2110 - what\'s the HP? I did a search for 2110 on these forums and got nothing?!? On Machinefinder.com there are two listed. One says 30hp and the says 40hp. Anyone know? Are these good...

Lost my only key in the snow today, looked everywhere, hope to find it in the spring. Ford pn# 9849079. Is there an universal key out there.??

Howdy all, I'm looking at a Ford 2110, unknown year (requesting SN to verify). 1700 hours overall, says that it's a rebuilt engine (asked about circumstances of that as well). Private owner...

My ford 2110 has calcium loaded tires in the rear. The rear left rim if rusting out and I called the dealer the other day and he gave me a price of 1100.00 for the outer rim, it is a 2 piece rim...

I was running my new to me 2110 this weekend and have put about 10 hours on it since I got it, , started getting a sulphar or rotten egg smell after running it about an hour or so this morning...

I am having problems with a 2110 lcg clutch. It will only disengage sometimes. It is totally unpredictable in when it will stick and the only way to get it out of gear when it is sticking is to...

Hello. I have a small farm with a lot going on. My mid 80s Ford 2110 with front loader and various implements old and new take care of nearly everything. Shibaura engine. Custom built front...

My moms tractor is a ford 2110. Rims are rotted from calcium leaking. Need two rims so get this tractor up and running so I can use for her property. Tires are F 151 A. Thats the best i can do...

I've got a Ford 2110 tractor and having some trouble. When the tractor is cold all gears shift fine and tractor runs as it should. When it gets warmed up, the tractor speed gets slower and have...

My Ford 2110 front wheel bearings (2 wh dr) imploded today, having a hard time finding these on line, I need the everything, bearings, seals, any help will be appropriated

Hi guys I need some HELP!. I was mowing on Sunday morning and went to shift gears from 3ed to 2nd and went straight down and got it in 4th by mistake and now its stuck in 4th. I cannot get it to...

Hi! New member here. Looking to buy a first time tractor. They are kinda scarce in my area. I would like really like to have a 4X4 due to the terrain and mud our property has. And of course, I...

Does anyone know where I can get the complete decal set for our 1971 Ford 2110 3 CYL LCG Tractor. I found the sheetmetal needed to clean it up and wanted to paint it. Everywhere I look it says...

My ford 2110 has calcium loaded tires in the rear. The rear left rim if rusting out and I called the dealer the other day and he gave me a price of 1100.00 for the outer rim, it is a 2 piece rim...

whats the difference between the manual transmission and the syncromesh?

Hi Everyone, Yesterday when I needed to bleed the system, it blew a seal (o-ring) and spewed the fluid all over the place, including me. Luckily only on my shoes and bottom of my pants. I...

Good morning everyone, Well on Friday afternoon I broke down and bought a used Ford 2110 tractor with a 5 brush Hog. For a 34-year-old tractor it痴 in pretty decent shape. I took it home Friday...

We have a 1973 F2110 LCG. We keep loosing power steering fluid but there are no leaks showing any where. Looks like crankcase level is increasing. At first it would take all day to lose enough...

Hi guys I got a new to me 1985 ford 2110 tractor last weekend and this weekends project is flushing the coolant and changing out the thermostat and upper and lower hoses. Anyone have a correct...

I just pulled a Ford 2110 out of the woods, it has been "resting" there for years. Can anyone tell me more about this tractor based on the numbers? ID# 00888, Model AV3135, Unit 4A27B, Engine...

I just pulled a Ford 2110 out of the woods, it has been "resting" there for years. Can anyone tell me more about this tractor based on the numbers? ID# 00888, Model AV3135, Unit 4A27B, Engine...

Looking for used good shape rims for 87 2110. thanks

The glow plug heater helps a little but it still only starts on 2 cylinders, and only when it feels like it. (black smoke when it tries to start) I was told today it may be a couple dead glow...

Hi All, I lost a freeze plug during the winter and need to replace it. PROBLEM is: It's behind the Injector Pump. A guy I know is an x heavy equip mechanic and he said I'd better be careful...

Can anyone tell me what size tires came on a late 1980's Ford 2110 4WD tractor. R1 Ag tires front and rear. Your help would be greatly appreciated.

Hello! Can anyone advise me on how to remove a fuel injector pump from a Ford 2110 tractor? Thanks.

Am considering a clean looking 2110 4wd ford w/ loader that needs ring and pinion for $7,000. Not a bad job in a truck, how about this tracror? Any comments welcome. Mcdust

I just used this a few days ago to bush hog and grade my driveway and everything was working fine. This morning... Following a cold spell over the past few days... (temp's in the teens over...

My 2110 will at times be difficult to steer other times normal except for excessive freeplay

The glow plug indicator has burnt in two allowing power to flow to only one side of the indicator which does not charge the actual glow plugs. What's an easy fix? Can I just splice the wires...

We are looking for used parts for a power steering gearbox on a Ford 2110 (1983-1987) Part nos SBA334010820 or SBA334292015 or SBA334292025. These parts are also used on some Ford 1910's. Thanks.

I have an 88 Ford 2110 with only 1100 hours on it. It's always taken what I think is too long for the glow plug to get hot, and when it's COLD out *never below freezing* it's really takes a long...

Good evening, I need to replace all four of the tie rod ends on my little blue tractor. I致e search google and since the 84 compact 2110 wasn稚 to popular all I find is parts for the much older...

I just pulled a Ford 2110 out of the woods and was wondering if someone can fill me in on the gory details of this tractor. The ID# 00888, Model AV3135, Unit 4A27B, and the engine is T854B 10883...

Today I changed the fuel filter on my 1986 Ford 2110. I filled the bowl to the top and started the tractor. It ran briefly then quit. It was not getting fuel. I get fuel at the top of the...

I also posted in the NH side. Good evening, I need to replace all four of the tie rod ends on my little blue tractor. I have search google and since the 84 compact 2110 was not to popular all I...

Well, I have learned much since my first post. First thing is my tractor is a 2110 not a 1710 :o I found the power steering pump and removed it but honestly I don't know what I am looking for...

Does any one have R4's on there Ford 2110?, if so what size are they? A friend of mine just bought a 2110 with turf tires and would like to get the R4's. Solo

So last January my hydraulics completely quit working. I don't have a shop so I left it 'til Spring' but I got T-boned in the car late February. Traumatic Brain Injuries (TBI) suck, and kept me...

I just came across a Ford 2110 Diesel 4x4, 2400 hours, FEL, pull behind mower. Turf tires, at least one flat. hasn't been run in three years, sitting outside. Guy is asking $2500, and doesn't...

Working on what I believe is a 2110 3 cylinder gas without power steering. The three point has always worked well and just stopped working at once. I checked the oil in the trans / rear end and it...

My 1986 Ford 2110 has just over 1100hrs and has an odd vibration that I can feel in the seat. It seems to pulse a bit and it is noticeable both with the PTO engaged and without it. The...

Parting a 1986 ford 2110. Located near Springfield, Vermont. What might be your needs.

hey guys my brother tilled in our garden for the winter when I got home he called me and said the clutch was making noise I went and checked it the pto portion of the clutch works fine but the...