Howdy. basically new to TBN. Have a problem with my Montana 5740 clutch needing adjusted it Slips in 3rd and 4th gear pretty bad. Hoping to see if anyone on here knows how to adjust it. Thanks

No issues with this machine until today. Started it this am - PTO will not turn in the MANUAL position. Need help with this!

My 2006 Montana 5740 - cab, 4wd, loader 1900 hrs has a problem. The loader sinks down when valve (joystick) is in neutral or default position. When you jiggle the joystick it will often, but not...

I have a Montana 5740 that is tuck in gear. the linkage is in second and shifter is in third. Can't get it out. Not much of a mechanic but have common scenes and access to tools and help. Any...

What is the best way to remove and replace broken bolts that hold the transmission case and rear end case together.

Have a 5740 (bought in 2005) that has run great until the other day. While cutting, the tractor just choked and died. Then would not start - cranked and cranked - not start. Though it may be a...

HELP! BOUGHT MONTANA 5740/ LS TRACTOR HAS HYDRALIC DIP STICK 1/4 IN HOLE IN REAR END BUT NO OBVIOUS REFILL POINT. ADJACENT COMPARTMENTS ARE SEPERATE FROM DIP STICK HYDRALLIC GAGE ON REAREND AND...

BEYOND EMBARASSMENT DIP STICK IN REAR END 1/4 IN HOLE BUT NO REFILL POINT TO BE FOUND - NO HELP FROM LS DEALER WHO SOLD ME THE TRACTOR WHO PROMISED OWNERS MANUAL- BUT NOW CANT PROVIDE. NOT A...

Montana 5740 When I shift in 4x4 won't engage ,clicking sound from left side . Any idea's will help

am new to the forum. and new to montana. have a 5740 with several issues. shifter sticking little hydraulic pressure in remotes. looking for a good service manual. thanks Mike

Pretty mundane question but the dipstick on my 5740 for hydraulic fluid has hardened and the rubber portion slides along the actual dipstick. If someone could give measurements to allow me to...

Hope someone has run into this - My Montana 5740 is stuck in either 1 or 2 and I can't get it to shift. When I push on shift lever too hard it slips out of mechanism. Clutch appears to be...

I have a pretty bad oil leak at the front pivot shaft. Any ideas?? Any help would be appreciated from . It seems to be hydraulic oil. New member , thanks

My gear shift leaver is jamed or stuck in one position and i cannot shift Help thank winker

Recently when you shift into reverse and start moving there in a grinding noise from trans area - noise goes away if you hold forward/reverse lever back ! Is there an adjustment on the lever ...

Hey Yawl, our 5740 shuttle won't stay in forward position...like the synchronizer or top shaft has play...it wants to push back when you try to hold it in..the tractor can be driven around like...

This is a duplicate post under a more informative heading. Sorry 'bout the rookie mistake! Good Morning. I am a new member to this board and, as of this weekend, a new Montana Tractor owner -...

Does anyone know how to verify the year of a Montana tractor ? I bought a 2008 5740c and I'm not sure it is a 2008. Does anybody know the changes that were made to distinguish a 2007 from a 2008...

I am close to a decision to purchase one of these tractors, dealers are within 50mi, the tractor would be used primary for bush hog mowing. I would be interested in hearing from anyone that has...

It doesn't snow around here much, so the stepson has never really driven in icy conditions. What the pictures don't show are the Jeep Wrangler behind the tractor with the 9000# winch. Neither one...

Sorry folks, I forgot to take a picture of the boom flail from the back, was more worried about whether or not I'd be able to keep track of the cutting head from the cab. Needn't have worried...

Hello All, I know many 5740's are in use and wanted to get some feedback or reviews on how hey are performing. Your thoughts and experiences will help others who want info about this model of...

Owners manual states that...When PTO selection switch is placed in "AUTO" position, if you press the main clutch pedal or the "hydraulic position control lever" moves up the arranged position...

This little beast showed up yesterday..... Had a chance to do a little hogging and some dirt work. So far so good. Is it true that happy tractor drivers get bugs in their teeth?...

I've been looking at the Montana 5740. Like everything I see but I'm a little concerned if it has enough power to run a 10 foot pull type Bush Hog. The dealer tells me the tractor is rated 52 hp...

Montana 5740 open station with 72\" grapple picture Hey all, I got a 5740 open station and the Montana 72" grapple set up and wanted to post some pictures for those interested. This thing is...