I've mentioned before that I've been interested in getting one of the little old Kubota tractors like the L245 or the B7100 and restoring it to new condition just for kicks. As far as I know...

Folks, Just bought this tractor, and I have having a heck of a time trying to figure out what model it is. I think I have narrowed it down to: L2201DT = L245DT L2000DT = L225DT Can't find any...

price? when ship to dealers?

Just bought one from neighbor - appears to be around 30 yrs old but runs great and in pretty good shape. I have read some and i didn't know it was grey market but could care less because i got a...

I recently inherited an L-200 here in Oregon . I believe its a pretty early edition as the Fenders Have Lights in the Front of them and it has the Mushroom Air Cleaner. I have done a few thing so...

are they do away with L150 -190?

I have a Kubota L2000 2WD. Does anyone have a link to a place where parts can be bought, or part numbers can be looked up in english? I had some kind of short this weekend, and it partially...

Hi All, My Dad just passed away and his old Kubota L200 is now my responsibility to take care of for my mother. Getting it running again would be a great help on her property. I know that it was...

Hello everybody. This is my first post here. It is about my little L200. I have owned it for 6 or seven years. I bought it with a few hours under 500! But the guy I bought it from got a blank...

I'm looking at a Kubota L200. There is a cylinder on the top center of the front axle. When I turn the steering wheel this cylinder slides forward or backwards. When I turn the steering wheel the...

Hi guys, Newbie to the forum -- I found it by doing some info searching about a Kubota L200 I'm thinking about buying. I'm in Washington state and the tractor in question looks to be an L200 in...

Just bought a L200. Diamond in the rough.

i am looking for kubota l200

Hi all, I have a Kubota L2000DT and live in Western Australia. It's a imported tractor (i.e. a grey import) and I think that model would normally be sold in Autralia and possibly the US as...

Hi would anyone have a wiring diagram for a Kubota L2000DT. I seem to have developed a wiring loom problem and a diagram would be a great help in tracing the wiring.

Can anybody tell me where to get one of these? I've been told that it is the same as an L225 Kubota but all of the photos that I look at don't have the vertical exhaust on them. It turns down...

Does anyone here have a PDF/doc of a service manual for my L2000? I know it's a grey market beast and yes, my local Kubota dealer refuses to even discuss it with me or sell me a manual for it. I...

Hi. I have just bought a Kubota L2000 and am desparately searching for a manual, preferably online and preferably free. Does anybody have any advice on where I could find one? Thanks

Am based in Japan bought these tractors from garage sale and am planning on using them I have about 50 acres and am very infant in the field I would like to know my fears or suprises I should be...

I have a Satoh Beaver 4x4 in good condition w/ a snow plow and chains, which I've been trying to trade for an older farm tractor suited to row crops. So far I've had several offers, but all except...

I am looking for the Front Differential Case assembly part number 34219-43300 -- New or Used Kubota L225DT (4WD) Ser. Number 10477 From what I read it sounds like Kubota L2000DT is a "Gray" &...

Hello folks. I am new here, and am looking for any info on where to locate a starter solenoid for my Kubota L200. It has been discontinued, so I am looking at used parts. My local starter shop...

I have recently purchased a L2000 kubota tractor and have been told it is a grey market model but was wondering if anyone has or can tell me of a source for the owners manual and spare parts manual

I have a chance to buy either a Kubota Tractor L2900, 4 wheel drive, LA480 Loader, Heavy Duty Front Bucket, Model # L1741A, Woods 7500 Backhoe, Gannon 73" Scraper with Rippers. Tandem axle...

I have a Grey Market L2000 2wd in fair condition. Runs, but lights and guages are inop. I have had it in shed for a year since I bought a bigger JD. I want to get rid of and out of the shed...

IS an L2000 a US or greymarket kubota? Anyone have any comments on one?

Hi Going to rebuild the engine on my old L2000DT Kubota. Can get all the parts required.......Just need to find the bolt tensioning specs for the head, big ends etc....can any one help out or...

I lost the bottom oilbath air filter cap on my L200. along with the air filter, and ran over it with the bush hog. Does any one know of a source to replace this? Is ther another way to get an air...

Hi, Can anyone advise me the model year of this tractor? and can you provide me with a copy of the manual page or reference that you found this information. It would be really helpful to me...

Hello, Where is the best/cheapest place on the internet to buy glow plugs for a 1973 Kubota L200 tractor? It has a 2 cylinder engine. Thanks, Travis R

i'm looking for control valve or parts for one for a L200 which is late 60's model, any help would be appreciated firejms21@worldnet.att.net

Hi guys, I recently bought an old L200, and I'm going through it little by little, trying to make things right... The air filter on this tractor consists of an air cyclone and an oil bath...

Need the 3 Shifting forks for this model transmission. If anyone has the same or knows the best place to start asking I would appreciate the info.

I just purchased a used L2000. I need to replace the full steering column and gearbox - complete, also need a steering wheel and new seat. Any suggestions will be greatly appreciated. I have...

The title of this post should read Warranty info on L2800, how can you edit a title of a post?I have had problems with the PTO going out two different times on my L2800 as I have posted about it a...

I have a Kubota L2000 graymarket or L225 US with 8.3 x 22" rear rims. Hard to find 22" tires without paying an arm and a leg. Will 8.3 x 24" rims have the same bolt pattern? Thanks

I moved this to the Kubota Ownin/Operating forum. Sorry.

I have an old but lightly used L200. The problem with the clutch is it will not completely disengage when I press the clutch pedal and I always have to grind the gears a little to get in gear. The...

I’m getting ready to install a diverter valve on my loader, to split the bucket curl/dump hydraulics to run a grapple. The factory 3rd function kit came with clamps for the extra tubing which...

Hello folks. I am new here, and am looking for any info on where to locate a starter solenoid for my Kubota L200. It has been discontinued, so I am looking at used parts. My local starter shop...