txdon
Super Star Member
Today's project: Framing and digging for a cement curbing for the sides of a paver walkway.
Today's Project Time
- Thread starter CompactTractorFan
- Start date
- Views: 4281
blackie65
Silver Member
finish up a ballast box and change the pins on a rear blade from CAT II to CAT I.
hose left in barn is frozen..... put in garage to thaw
may mix sakrete with bucket or just wait
Ran out of Oxygen so torch work is done.
supplier is closed.... hacksaw...NOT maybe long extension cord and sawzall
Seems like all I planned is not going according to plan
Also, the plastic extension on the new safety diesel can fell in the tank when filling tractor.
Guess I will go to the woods and get some wood
hose left in barn is frozen..... put in garage to thaw
may mix sakrete with bucket or just wait
Ran out of Oxygen so torch work is done.
supplier is closed.... hacksaw...NOT maybe long extension cord and sawzall
Seems like all I planned is not going according to plan
Also, the plastic extension on the new safety diesel can fell in the tank when filling tractor.
Guess I will go to the woods and get some wood
czechsonofagun
Elite Member
Rebuilding KitchenAid mixer, after 10 years of hard service it stopped. Of course it stopped on Tuesday before Thanksgiving:thumbsup:
I replaced the board - it was always confused on speed, it was time to do it
also replaced cracked transmission housing with aluminum one this time
yesterday I found why it stopped - the thermal fuse on the field burned, got a new one from Radio shack.
All it needs now is the front bearing - ebay - and it will run again.
I replaced the board - it was always confused on speed, it was time to do it
also replaced cracked transmission housing with aluminum one this time
yesterday I found why it stopped - the thermal fuse on the field burned, got a new one from Radio shack.
All it needs now is the front bearing - ebay - and it will run again.
OP
CompactTractorFan
Super Member
Hanging Christmas lights today...:confused2::confused2::confused2:
jinman
Rest in Peace
- Joined
- Feb 23, 2001
- Messages
- 20,387
- Location
- Texas - Wise County - Sunset
- Tractor
- NHTC45D, NH LB75B, Ford Jubilee
finish up a ballast box and change the pins on a rear blade from CAT II to CAT I.
hose left in barn is frozen..... put in garage to thaw
may mix sakrete with bucket or just wait
Ran out of Oxygen so torch work is done.
supplier is closed.... hacksaw...NOT maybe long extension cord and sawzall
Seems like all I planned is not going according to plan
Also, the plastic extension on the new safety diesel can fell in the tank when filling tractor.
Guess I will go to the woods and get some wood
Stream of conciousness post?
grnspot110
Elite Member
- Joined
- May 16, 2007
- Messages
- 2,675
- Location
- MO
- Tractor
- John Deere 1944- H, 1961 Cub Lo-Boy, 2016- JD 2025R, 2018- JD X580
LBrown59
Super Star Member
- Joined
- Oct 27, 2004
- Messages
- 16,831
- Tractor
- 2003 Kubota BX1500/2004 Kubota Bx23/2005 Kubota BX1500
1* and 2*There is already a thread that covers all these examples.
WHAT DID YOU DO TODAY ? - TractorByNet.com
It would be nice to keep every thing in just one thread .
Makes it easier for all to find and easier to keep all the info toghter.
OP
CompactTractorFan
Super Member
Sorry, I was not aware that there was another thread.
jinman
Rest in Peace
- Joined
- Feb 23, 2001
- Messages
- 20,387
- Location
- Texas - Wise County - Sunset
- Tractor
- NHTC45D, NH LB75B, Ford Jubilee
Tilled up a flowerbed with my Mantis-style tiller, added six bags of cotton burr compost, retilled, and planted 200 tulip bulbs. Actually, I only planted 100 tulip bulbs since my wife planted the other 100. She raked the bed smooth after I tilled it too. :thumbsup:
txdon
Super Star Member
... and planted 200 tulip bulbs... :thumbsup:
I bet a ukulele is on your wish list.
YouTube - Tiny Tim
