Price Check Boomer 3040 price qoute

[jinman]

I am not jumping at this right away have till the end of the month to make up my mind.

Bear in mind that I have not been shopping for tractors in a long time. It just seems to me that the basic HST 3040 is nothing new except for a number on the hood and a different loader manufacturer from the TC45DAs of a few years ago. There is really no new technology to drive up the cost except perhaps that Shibaura production is winding down while NH figures out who is going to build their tractors in the future. By all means, make your best deal on your equipment and tractor. Don't let my feelings sway you without verification. A true statement would be that a tractor at $30K and 0% for 6 years is a heck of a lot better than a 6% note on $27k for 6 years. In other words, the interest is included in the price and the higher dollar deal can certainly be the best deal at 0%. That doesn't mean you can't ask for a better deal and negotiate hard. You'll find out how much your dealer wants you as a customer that way.:thumbsup:

 

[bironacad]

Bear in mind that I have not been shopping for tractors in a long time. A true statement would be that a tractor at $30K and 0% for 6 years is a heck of a lot better than a 6% note on $27k for 6 years. In other words, the interest is included in the price and the higher dollar deal can certainly be the best deal at 0%. That doesn't mean you can't ask for a better deal and negotiate hard. You'll find out how much your dealer wants you as a customer that way.:thumbsup:

My limited brain power gets tapped at times but this does make sense, lol.

 

[LowerSlower]

If it helps, i got a cab 3040 CVT with FEL, wheel weights and rear remote for $30,000. I already have the backhoe from my TC35DA trade. CVT is a little getting used to but the cab is great. $30,000 for that seemed to be good deal after calling a bunch of dealers. I'm pretty happy w the deal.

 

[bironacad]

If it helps, i got a cab 3040 CVT with FEL, wheel weights and rear remote for $30,000. I already have the backhoe from my TC35DA trade. CVT is a little getting used to but the cab is great. $30,000 for that seemed to be good deal after calling a bunch of dealers. I'm pretty happy w the deal.

I purchased the 3045 at $37850 with a radio, cab, skid steer quick attachment, fel, mid pto, rear remotes for attachments. I like your price all said an done I got more tractor then required for a competitive price here in Ontario. I take delivery end of the week. Thanks for the post, yours, Bill

 

[Sumpter]

If it helps, i got a cab 3040 CVT with FEL, wheel weights and rear remote for $30,000. I already have the backhoe from my TC35DA trade. CVT is a little getting used to but the cab is great. $30,000 for that seemed to be good deal after calling a bunch of dealers. I'm pretty happy w the deal.

Do you have the backhoe on the 3040? I haven't seen one with the cab and backhoe and was wondering what it looks like. I assume you have to sit outside the cab to operate.

 

[bironacad]

That is the way mine is going to work, sitting behind the cab. I got the New Woods Backhoe BH80-X with a mechanical thumb. The tractor requires adapter plates for the four point mounting to frame. I will get the tractor the end of the week but will be waiting for the adapter plates and hoe.

 

[Sumpter]

That is the way mine is going to work, sitting behind the cab. I got the New Woods Backhoe BH80-X with a mechanical thumb. The tractor requires adapter plates for the four point mounting to frame. I will get the tractor the end of the week but will be waiting for the adapter plates and hoe.

Did you get any of the quick attach for the front? I can't remember. It would be the bracket for the front blade or blower that I am talking about.

 

[bironacad]

Did you get any of the quick attach for the front? I can't remember. It would be the bracket for the front blade or blower that I am talking about.

I went for a pull behind blower so that I could still used the FEL it was $4000 dollars less expensive. I was looking at the front mounted blower because I didn't want to be looking over my shoulder all the time, bad back and neck. The pull blower is not ideal for big snow but will save me some bucks and give me use of the loader if needed. The loader is on a skid steer quick attach system which allows me to drop the bucket and attach forks in a snap which I like I am even looking at fabricating a plate with assorted trailer hitches to go on the quick attach system. Hope to have the tractor by Friday but will be waiting on the Back hoe. I haven't got the tractor yet and have already got things I want to build for attachment, lol.

 

[Sumpter]

I was just curious because I was wondering if the front blower mount that I have would interfer with the backhoe attachment.

 

[bironacad]

I was told that the mounting attachment for the front blower can be removed if required or if I was worried about getting it caught up on brush. That being said the dealer was going to sell me the front blower and the back hoe and it was not an issue for the quick attachment for the blower. So you would not have to remove your front frame attachment for your blower to attach the Backhoe.

My skid steer attachment is a different thing all together it just a way of dropping the bucket without taking of the loader arms.