I Build "UGLY"

   / I Build "UGLY" #1  

crash325

Elite Member
Joined
Feb 9, 2011
Messages
3,999
Location
Tucson AZ
Tractor
New Holland TC-45
I sure do admire all you folks the build and paint some really nice things.

Most of the time when I build something, its a needed item. Or I figure that it will need more work and I'll make it pretty later.

Also most of the time whatever I build its out of whatever scrap metal that is on hand.

More Ugly later if you can stand it.
 

Attachments

  • small drag 1.jpg
    small drag 1.jpg
    124.2 KB · Views: 472
  • carry-box-3e.jpg
    carry-box-3e.jpg
    92.3 KB · Views: 432
  • 3pt-2e.jpg
    3pt-2e.jpg
    110.1 KB · Views: 394
  • pusher 3.jpg
    pusher 3.jpg
    196.7 KB · Views: 455
  • forks 2e.jpg
    forks 2e.jpg
    158.3 KB · Views: 403
  • forks 1e.jpg
    forks 1e.jpg
    192.4 KB · Views: 476
  • roller 1300LB.jpg
    roller 1300LB.jpg
    122.1 KB · Views: 463
  • fork n bucket.jpg
    fork n bucket.jpg
    111.1 KB · Views: 398
  • post drivers.jpg
    post drivers.jpg
    132.6 KB · Views: 388
  • pickle fork 1.jpg
    pickle fork 1.jpg
    117 KB · Views: 476
  • big drag 1.jpg
    big drag 1.jpg
    112.7 KB · Views: 327
  • big drag 3.jpg
    big drag 3.jpg
    149.8 KB · Views: 443
   / I Build "UGLY" #3  
nothing is ugly when its useful! :thumbsup: looking good!

I am intrigued by your extra long tooth for your BH bucket. can you tell me a bit more about it and what do you use it for?
 
   / I Build "UGLY"
  • Thread Starter
#4  
nothing is ugly when its useful! :thumbsup: looking good!

I am intrigued by your extra long tooth for your BH bucket. can you tell me a bit more about it and what do you use it for?

Hi
That is what I call a pickle fork digger. It's used for trenching out for water pipes, root breaking and rock pulling. Goes on with 2. 1/2" bolts in 2 or 3 minutes.

Mine is made of 3/16"X3" "C" channel, reinforced with 1/2" steel, old spring and 2 R/R spikes at the bottom. It works fine as is, but plan on a sharp edge on 1 side and an angled plate neat the top to move dirt off to 1 side. Have also cut a shovel down to 3" for cleaning out trench. It has worked well for me.
 

Attachments

  • keyhole slots.jpg
    keyhole slots.jpg
    92.1 KB · Views: 1,741
   / I Build "UGLY" #5  
The ugly ones want to dance too. :thumbsup:
 
   / I Build "UGLY" #6  
When you hook it up to your tractor and start using it and it works just the way you wanted it to, it automatically becomes beautiful! Nice work!
 
   / I Build "UGLY" #8  
Ugly is fine, but remember if you decide to build a dump trailer, I already have the "Ugly dump trailer" name copyrighted...



David from jax
 
   / I Build "UGLY" #9  
Crash, you have 2 choices the way I see it, Some paint that matches your tractor, or just put a grocery bag over it:D
If it was "too purdy", you may not enjoy using it as much!

If the stuff works, I say roll with it.
 
   / I Build "UGLY" #10  
Something ( only thing ) I learned in architecture school ( did not graduate in that field ) : Form follows function . Translation : If it does what it supposed to, it looks like its supposed to . If all else fails, apply the bar rule, drink 'till she' s cute !!
 

Tractor & Equipment Auctions

2018 PJ TRAILER 32FT GOOSENECK TRAILER (A55745)
2018 PJ TRAILER...
Massey Ferguson 4608 (A53317)
Massey Ferguson...
2007 Ford F-450 Ambulance (A55788)
2007 Ford F-450...
LIMA MAC 60KW GENERATOR (A58214)
LIMA MAC 60KW...
2013 Ford Taurus Sedan (A56859)
2013 Ford Taurus...
2006 INTERNATIONAL 7400 6X4 DUMP TRUCK (A52706)
2006 INTERNATIONAL...
 
Top