moored4
Veteran Member
- Joined
- Jan 31, 2011
- Messages
- 2,311
- Tractor
- Kubota l245dt, l3540, 8N
OUCH! That hurts! But as some have said here "No pictures - Didn't happen!" I bet it still hurts!
Driled my finger
- Thread starter czechsonofagun
- Start date
- Views: 5223
JDgreen227
Super Member
Sorry to hear about your accident, considering how much I have used drills during the last 40 years I am probably fortunate I have never injured myself that way.
Not to hijack the thread, but my wife's brother in law has damaged fingers on both hands because he was careless with power saws...two separate incidents.
Not to hijack the thread, but my wife's brother in law has damaged fingers on both hands because he was careless with power saws...two separate incidents.
MWRR
Silver Member
- Joined
- Jan 9, 2011
- Messages
- 146
- Location
- East Central Illinois
- Tractor
- John Deere 5105M & IH Farmall 544
Is this one of those life learning moments? 
OP
czechsonofagun
Elite Member
LOL. I am glad TBN stepped up to the challenge
I was drilling holes in vineyard trellis steel posts. They were bending under the pressure - decided to hold it against the drill and one time placed the hand carelessly.
I was drilling holes in vineyard trellis steel posts. They were bending under the pressure - decided to hold it against the drill and one time placed the hand carelessly.
LD1
Epic Contributor
If you had cleaned up the edges of the hole with a countersink, you might have needed only 2 stitches.
Brice
:laughing::laughing::laughing:
After that, he could have tapped the hole and put a plug in there and needed NO stiches
Tollster
Veteran Member
What no pictures!
Oh yea...... 3/8" gets a doctors visit but 1/4".......I don't know about that
I do know about it and its true, hopefully ya seared off the bleeding by placing your pinky on the other side of the piece to be drilled so ya didn't make a mess
kenmac
Super Member
- Joined
- Feb 13, 2005
- Messages
- 9,835
- Location
- The Heart of Dixie
- Tractor
- McCormick CX105 Kubota MX 5100 HST, Kubota ZD1021, Kawsaki Mule 4010 trans 4x4
Today I put 1/4" cobalt drill bit through my right pinky. 4 stiches
Have you used a nail gun yet ? Ever shot a nail through your finger ? Not as bad as a drill . but, it doesn't feel very good either. It's quick
The Haymaker
Veteran Member
No pictures? This thread made me remember this little gem on a bike forum. VERY GRAPHIC. If a little blood makes you queasy, don't blame me if you look at it.
How NOT to clean your chain. **GRAPHIC PICS*** : Suzuki GSX-R Motorcycle Forums: Gixxer.com
How NOT to clean your chain. **GRAPHIC PICS*** : Suzuki GSX-R Motorcycle Forums: Gixxer.com
CompactTractorFan
Super Member
Ouchhhhhhhh......wow....:confused2:
jinman
Rest in Peace
- Joined
- Feb 23, 2001
- Messages
- 20,387
- Location
- Texas - Wise County - Sunset
- Tractor
- NHTC45D, NH LB75B, Ford Jubilee
Prokop, I'm glad you are okay and not worse for the wear. I know there seems to be nothing that hurts quite like a hurt finger. I'm not gonna make some wise remark because that would be bad karma. It would surely come back to haunt me.
