orezok
Elite Member
A disadvantage in super singles is getting a flat. Most likely you will destroy the wheel.
True, but when you lose one tire the mate is loaded at double and won't last long either.
A disadvantage in super singles is getting a flat. Most likely you will destroy the wheel.
True, but when you lose one tire the mate is loaded at double and won't last long either.
I don't think I've ever seen that setup in Florida. Are they legal in all states and I assume you can retrofit a rig with them?
I ran super singles in the sixties on twin axle trailers and never had a blow out or a flat during about seven years of trucking with them. Mind you I did always check pressures and keep them up higher than recomended those days.
In the seventies we went on to bigger wider twin tyres and the drive axles went up to 13 tons(about 29000 lbs) with steering axles at 7 tons and rear trailer axles at 7 or 8 tons x 3 axles so gross weights wre allowed to go up to 38 tons (about 85000lbs)
Later in the late eighties and early nineties we changed to triple axle trailers and those had super singles as standard but the axles were and are still rated at lower weights.
Now we run semis on six axles and the weights are up to 44 tons gross (98000lbs approx) running super singles on the three axle trailers.
They are very reliable and take the weight, pressures are up to 120psi