1026r in an Enclosed Trailer?

   / 1026r in an Enclosed Trailer? #1  

lindenj

New member
Joined
Mar 9, 2013
Messages
16
Location
Ashern MB Canada
Tractor
x300r
I have an enclosed Pace American Motorcycle type trailer with the rear ramp door. Question: Would I be able to load and haul my 1026R w/backhoe & loader on it? I am a little fearful of the ramp and floor strength. :confused2:

thnx,
LJ
 
   / 1026r in an Enclosed Trailer? #2  
You know your trailer better than any of us but my answer is no. Floor strength is a issue. Ask the manufacturer the weight per square feet its rated to. My guess is 25 to 50#. Not enough for a tractor that is putting all that weight in 4 sq ft or less.

My guess is your little tractor is pushing 2500# to 3000# with the loader and backhoe.

Chris
 
   / 1026r in an Enclosed Trailer? #3  
Agree, no. If the floor would support it, I doubt the ramp door would. Don't try it.
 
   / 1026r in an Enclosed Trailer?
  • Thread Starter
#4  
I guess my option would be to run a couple 2'x8' runners the length of the floor and another set for the ramp doors? Surely that would do?
 
   / 1026r in an Enclosed Trailer? #5  
I guess my option would be to run a couple 2'x8' runners the length of the floor and another set for the ramp doors? Surely that would do?

What is the trailer rated at? Remember, what ever it is you must subtract that from the GVWR to get the payload.

Let's say your trailers GVWR is 3500# & it weighs 900# empty. That will leave you with 2600# for payload.

Chris
 
   / 1026r in an Enclosed Trailer?
  • Thread Starter
#6  
payload is not an issue here......lots of room weight wise....just the ramp door and plywood floor strength. I will call Pace American tomorrow.....Iknow the car tariler wouldnt be an issue....this trailer is considerably narrower so not sure if the ramp door and floor have adequate strength for the 1026
 
   / 1026r in an Enclosed Trailer? #7  
payload is not an issue here......lots of room weight wise....just the ramp door and plywood floor strength. I will call Pace American tomorrow.....Iknow the car tariler wouldnt be an issue....this trailer is considerably narrower so not sure if the ramp door and floor have adequate strength for the 1026
Ireally hope I never meet you on the road . Isee these posts and just hope my wife gets home safely . There sure are a lot of nothing to it jackasses going down the road . How old are you .
 
   / 1026r in an Enclosed Trailer?
  • Thread Starter
#8  
How old am I?......really.....hey bud....I have over 1 million accident free miles on an 18 wheeler......please don't try to preach your amateur bs to me...k?...how old am I ...thats too funnie

ohh and by the way.....I am sixty byrs old recently retired after hauling lowbed for 35+ years
 
   / 1026r in an Enclosed Trailer? #9  
How old am I?......really.....hey bud....I have over 1 million accident free miles on an 18 wheeler......please don't try to preach your amateur bs to me...k?...how old am I ...thats too funnie

ohh and by the way.....I am sixty byrs old recently retired after hauling lowbed for 35+ years

I apologize .
 
   / 1026r in an Enclosed Trailer? #10  
Another consideration is securing it? Are there sufficient tie downs in a motorcycle trailer to secure something pushing 3000#?

Chris
 

Tractor & Equipment Auctions

RAKE ATTACHMENT FOR MINI EXCAVATOR (A58216)
RAKE ATTACHMENT...
(1) HD 24ft Free Standing Corral Panel with 7ft Gate (A57453)
(1) HD 24ft Free...
UNKNOWN  SKIDDED FRAC TANK (A58216)
UNKNOWN SKIDDED...
(1) HD 24ft Free Standing Corral Panel (A57453)
(1) HD 24ft Free...
2005 Sterling Acterra Tender Truck (A56438)
2005 Sterling...
2019 TAKEUCHI TL6R SKID STEER (A52709)
2019 TAKEUCHI TL6R...
 
Top