50 dollar brush hog craigslist find

[BigMike50]

How does it not stall out going through that thick stuff?? My mower chokes out on tall grass, but i guess its only a 10hp and i am cutting pretty close.

I don't know man. Asked my self the same question. This thing is only 9 hp I believe but it just doesn't break a sweat. Weird if u ask me

 

[bullbreaker]

I bet the deer are loving their new trails.


Boone

 

[clemsonfor]

I don't know man. Asked my self the same question. This thing is only 9 hp I believe but it just doesn't break a sweat. Weird if u ask me

I have a wheel horse about the same age but its all beat and collapsed with a seized motor, i may have to put it back togeather!! IT was gran dads which is why i have not scrapped it yet, although it will be pretty costly to revive it with a motor and all 4 rubber!! What i need is to find a doner junker or something with a motor and tires.

 

[k0ua]

Part of the reason it may not stall, it that you have the transmission in Neutral. So all available engine power is going to the deck. None is being drained off to propel the unit. Provided of course the deck belt is in good shape and can take the full torque of the engine and the blades are sharp too.. Sooner or later you will hit something thick enough to find out!

James K0UA

 

[94BULLITT]

Part of the reason it may not stall, it that you have the transmission in Neutral. So all available engine power is going to the deck. None is being drained off to propel the unit.
James K0UA

That is what I was thinking.

 

[Soundguy]

Part of the reason it may not stall, it that you have the transmission in Neutral. So all available engine power is going to the deck. None is being drained off to propel the unit. Provided of course the deck belt is in good shape and can take the full torque of the engine and the blades are sharp too.. Sooner or later you will hit something thick enough to find out!

James K0UA

i just had my deck off my 15yr old murray swinging ont he cherry picker using a sledge and block of wood to reform the right front 'corner' profile of the deck after finding a tpost sheared off int he pasture. brush mower must have chopped it near the fence line and left just enough post up for the lawn mower to find it while i was cleaning up the fence line. mulched the blade.. and the blade ate a line into the deck and the deck was bent.

luckilly newblades for that old mower are 9$ each.. and a lil grinder and hammer and beating and it's .. well.. not back to good as new.. but back to working and ugly..

 

[deezler]

wow, seems like a pretty horrible idea to me. Not gonna last, and pretty dangerous. But, have at 'er, if that's your thing....

 

[BigMike50]

wow, seems like a pretty horrible idea to me. Not gonna last, and pretty dangerous. But, have at 'er, if that's your thing....

machine already paid for itself and 50 bucks hardly puts a dent on my pocket anyway. I know its not safe but neither is driving a vehicle on the road anymore around all these teeny boppers texting and driving and swerving into your lane. It is my thing and I will keep having at it till it breaks. No bad blood but I figured you probably wanted an explanation

 

[clemsonfor]

Heck if it weighs what you said at 300lbs you will get $30 for it selling it at the junk yard. In that case your only out $20 from te original purchase.

 

[k0ua]

Heck if it weighs what you said at 300lbs you will get $30 for it selling it at the junk yard. In that case your only out $20 from te original purchase.

If scrap iron is worth that much, some of the hillbilly's around here must be rich, their yards are full of old mowers and such junk. Of course they would never sell any.. they are just amassing their wealth:laughing:

James K0UA