rstephenson
New member
I would like to put dual wheels both front and back on my 1979 yanmar ym2000d. does anyone have any information on where i can get the wheels and tires and the dual spacers? thank you in advance.
Yanmar ym2000d dual wheels
- Thread starter rstephenson
- Start date
- Views: 6087
normde2001
Elite Member
- Joined
- Mar 10, 2002
- Messages
- 4,163
For starters you are looking to destroy your front wheel drive and spindles/bearings with duals. you may find spacers on Ebay, or have to make them. Wheels from any parts dealer, tires from tire dealer.
OP
rstephenson
New member
Don't want to destroy anything. Maybe just the back then. Thanks. I'll check eBay
clemsonfor
Super Member
International has a ym2000 that he made spacers for and dualed up on the rear. The outside tires were just slightly smaller in diameter as they came of a smaller tractor...a 1700 maybe. He has a thread and pics on here of it.
His was for fun...he is a tractor guy and collets and tinkers with them.
Why would you want to...if you really need duals on a tractor that is this light and built to be in rice paddies i dont think that you need to be in there in the first place!!!
His was for fun...he is a tractor guy and collets and tinkers with them.
Why would you want to...if you really need duals on a tractor that is this light and built to be in rice paddies i dont think that you need to be in there in the first place!!!
OP
rstephenson
New member
I really don't need duals either, just want them! Makes the tractor look much better. How do i look up the thread by International?International has a ym2000 that he made spacers for and dualed up on the rear. The outside tires were just slightly smaller in diameter as they came of a smaller tractor...a 1700 maybe. He has a thread and pics on here of it.
His was for fun...he is a tractor guy and collets and tinkers with them.
Why would you want to...if you really need duals on a tractor that is this light and built to be in rice paddies i dont think that you need to be in there in the first place!!!
Kernopelli
Veteran Member
- Joined
- Oct 16, 2006
- Messages
- 2,209
- Location
- Carterville, Illinois
- Tractor
- Mitsubishi MTE2000D, Dig It 258 Mini Ex, Deere Z930A ZTR
clemsonfor
Super Member
There the thread is...thank you. 284international, not sure how i forgot that name?
OP
rstephenson
New member
Thanks!
California
Super Star Member
- Joined
- Jan 22, 2004
- Messages
- 14,975
- Location
- An hour north of San Francisco
- Tractor
- Yanmar YM240 Yanmar YM186D
This duals adapter diagram is in the 'options' chapter at the back of YM240 Operation or Parts manual. (I forget which. Maybe both).
And here's the old thread where I posted that. The thread responds to new owner questions about duals and a lot of other stuff. Note another poster listed dimensions and posted photos for a similar factory option, rear axle extenders that look like this but shorter.
And here's the old thread where I posted that. The thread responds to new owner questions about duals and a lot of other stuff. Note another poster listed dimensions and posted photos for a similar factory option, rear axle extenders that look like this but shorter.
clemsonfor
Super Member
Still curious why you want or need duals. Seriously???:confused3: