Tractors and wood! Show your pics

CanuckPT · Aug 30, 2015

jodebg said:
Dimensions: 35" deep/ 56" wide/ 48" high (from bottom of feet to top of rail) 36" high in the cargo area Here are some additional photos... <img src="http://www.tractorbynet.com/forums/files/owning-operating/439188-tractors-wood-show-your-pics-p1030018-jpg"/><img src="http://www.tractorbynet.com/forums/files/owning-operating/439189-tractors-wood-show-your-pics-p1030023-jpg"/><img src="http://www.tractorbynet.com/forums/files/owning-operating/439190-tractors-wood-show-your-pics-p1030024-jpg"/><img src="http://www.tractorbynet.com/forums/files/owning-operating/439191-tractors-wood-show-your-pics-p1030025-jpg"/><img src="http://www.tractorbynet.com/forums/files/owning-operating/439192-tractors-wood-show-your-pics-p1030026-jpg"/><img src="http://www.tractorbynet.com/forums/files/owning-operating/439193-tractors-wood-show-your-pics-p1030048-jpg"/><img src="http://www.tractorbynet.com/forums/files/owning-operating/439194-tractors-wood-show-your-pics-p1030056-jpg"/><img src="http://www.tractorbynet.com/forums/files/owning-operating/439195-tractors-wood-show-your-pics-p1030257-jpg"/><img src="http://www.tractorbynet.com/forums/files/owning-operating/439196-tractors-wood-show-your-pics-p1030262-001-jpg"/><img src="http://www.tractorbynet.com/forums/files/owning-operating/439197-tractors-wood-show-your-pics-p1030503-001-jpg"/> First photo shows the inset casters for rolling the carry all when off the tractor. Last photo shows the feet installed on the carry all for support when the carry all is in use. The rubber pads allow the carry all to make a great "emergency brake." The feet are quick to install and remove with a 3/8" bolt thread into a fixed t-nut. The side panels are also quick and easy to remove. They slide out of slots in the floor and at the same time fit into grooves in the back frame.

Have you considered starting a thread on this build? I'd love to be able to subscribe to it for future reference! Excellent job on your build!

Sent from my iPhone using TractorByNet

CanuckPT · Aug 30, 2015

jodebg said:
Dimensions: 35" deep/ 56" wide/ 48" high (from bottom of feet to top of rail) 36" high in the cargo area Here are some additional photos... <img src="http://www.tractorbynet.com/forums/files/owning-operating/439188-tractors-wood-show-your-pics-p1030018-jpg"/><img src="http://www.tractorbynet.com/forums/files/owning-operating/439189-tractors-wood-show-your-pics-p1030023-jpg"/><img src="http://www.tractorbynet.com/forums/files/owning-operating/439190-tractors-wood-show-your-pics-p1030024-jpg"/><img src="http://www.tractorbynet.com/forums/files/owning-operating/439191-tractors-wood-show-your-pics-p1030025-jpg"/><img src="http://www.tractorbynet.com/forums/files/owning-operating/439192-tractors-wood-show-your-pics-p1030026-jpg"/><img src="http://www.tractorbynet.com/forums/files/owning-operating/439193-tractors-wood-show-your-pics-p1030048-jpg"/><img src="http://www.tractorbynet.com/forums/files/owning-operating/439194-tractors-wood-show-your-pics-p1030056-jpg"/><img src="http://www.tractorbynet.com/forums/files/owning-operating/439195-tractors-wood-show-your-pics-p1030257-jpg"/><img src="http://www.tractorbynet.com/forums/files/owning-operating/439196-tractors-wood-show-your-pics-p1030262-001-jpg"/><img src="http://www.tractorbynet.com/forums/files/owning-operating/439197-tractors-wood-show-your-pics-p1030503-001-jpg"/> First photo shows the inset casters for rolling the carry all when off the tractor. Last photo shows the feet installed on the carry all for support when the carry all is in use. The rubber pads allow the carry all to make a great "emergency brake." The feet are quick to install and remove with a 3/8" bolt thread into a fixed t-nut. The side panels are also quick and easy to remove. They slide out of slots in the floor and at the same time fit into grooves in the back frame.

Have you considered starting a thread on this build? I'd love to be able to subscribe to it for future reference! Excellent job on your build!

Sent from my iPhone using TractorByNet

wmonroe · Aug 30, 2015

Like the others have mentioned, very nice build and impressive attention to detail.

wmonroe · Aug 30, 2015

MortalWombat said:
What is this thing for?

I was going to ask the same question.

skyhook · Aug 31, 2015

MortalWombat said:
What is this thing for?

Its a doo hickey for the thingamajig

jodebg · Aug 31, 2015

I bought this hand tool many years ago. I use it for gardening, stone and block work, weeding, mulching, digging, etc..

Gordon....thanks for the kind words regarding the carry all. Now, I need someone to teach me how to weld.

jodebg · Aug 31, 2015

CanuckPT...Let me know if you have any questions or if you would like additional photos, dimensions, etc.. Happy to help.

Not sure if a thread on this build would be of interest to others?

Baby Grand · Aug 31, 2015

jodebg said:
CanuckPT...Let me know if you have any questions or if you would like additional photos, dimensions, etc.. Happy to help.

Not sure if a thread on this build would be of interest to others?

I think it's a great subject for a thread, either in the Attachments section or the Build-It-Yourself section.
A lot of members use carry-alls & modify them, so it should get a lot of views & participation.

As others have noted - you're craftsmanship and attention to detail are impressive.
I really like the counterbored bolt holes, so the bolt heads sit below the wood surface.
-Jim

CanuckPT · Aug 31, 2015

jodebg said:
CanuckPT...Let me know if you have any questions or if you would like additional photos, dimensions, etc.. Happy to help. Not sure if a thread on this build would be of interest to others?

I'm certain it would be a worthy thread! Let us know if you decide to create it - I'll be the 1st to subscribe!

Sent from my iPhone using TractorByNet