Has anyone switched there regular bulbs for light bar to LEDS? My relay keeps on melting in cab. It will run for a couple weeks but putting 30 amps through that little prong on the relay seems to melt it down. I figure if I can get the correct leds for the application it would bring down the amount of current through the the relay maybe that would solve my problem. I'm not sure if I can just go buy some Leds and put them in. The bulb is 885. Just wondering if anyone has tried it.
Running LEDS for Toolcat
- Thread starter Kurtis22
- Start date
- Views: 15893
Jabonee
Platinum Member
I don't think its a current issue. LEDs do not draw the as much current as incandescent. Possibly a feed back issue because of the LEDs. LEDs are polarized. The may not be signaling the controller that the lights are on or off. :confused3:
ruffdog
Super Star Member
- Joined
- Dec 31, 2011
- Messages
- 10,650
- Location
- southern wisconsin
- Tractor
- Bobcat Toolcat 5610G, Deere X744, Cub Cadet IH 982
I'm thinking the OP wants to switch to LED's because of the issue.
Jabonee
Platinum Member
10-4 :confused2:
Xfaxman
Super Star Member
- Joined
- Feb 8, 2013
- Messages
- 12,885
- Location
- Guthrie, OK
- Tractor
- Toolcat 5610 G - Bobcat V417 - TORO+Loader
I don't use the lights much, so haven't thought about it. I did replace the the headlight bulbs in the Polaris with LEDs so know it can be done.
The other option is to replace the the whole thing with a LED work light:
PILOON
Super Star Member
I would say no problem substituting LED's for sealed beams.
In fact there exists some very neat and compact LED light bars that are ideal for tractor usage, I found one compact light bar that has 12 LEDs in 3 clusters of 4.
The center cluster is 'spot' and the outer 4's are 'flood' all packaged in an adjustable finned aluminum housing.
Current draw is minimal and the lighting is simply awesome and better that the pair of halogen spots/work lights it replaces.
In fact there exists some very neat and compact LED light bars that are ideal for tractor usage, I found one compact light bar that has 12 LEDs in 3 clusters of 4.
The center cluster is 'spot' and the outer 4's are 'flood' all packaged in an adjustable finned aluminum housing.
Current draw is minimal and the lighting is simply awesome and better that the pair of halogen spots/work lights it replaces.
Xfaxman
Super Star Member
- Joined
- Feb 8, 2013
- Messages
- 12,885
- Location
- Guthrie, OK
- Tractor
- Toolcat 5610 G - Bobcat V417 - TORO+Loader
Yep, replacing all 4 with a light bar is another option :thumbsup::
craneman13
Bronze Member
but it would take away from the "cool off road look" right?
laurencen
Veteran Member
- Joined
- Feb 19, 2007
- Messages
- 1,188
- Location
- saskatchewan Canada
- Tractor
- Bobcat Toolcat 5600T Kioti CK20, Cat D2 dozer, Cat 420 tractor loader, Deer 644E loader, Bobcat E32 mini and Bobcat 590 skidsteer, Toro Groundsmaster 325D
i switched the original lights for 4 LED lights, they are 18w 6LED bulbs in each, draws way less power, i used 2 spot and 2 flood easily 3x brighter
craneman13
Bronze Member
what lights did you buy?
