abunchofidiots
Bronze Member
I'm a fan of the Omni Pro 220 welder.
Harbor Freight Tools that don't suck
- Thread starter Travelover
- Start date
- Views: 4076854
I'm a fan of the Omni Pro 220 welder.
reb
Platinum Member
The power factor of a typical motor means more like 1000 watts per horsepower.
aczlan
Good Morning
- Joined
- Mar 7, 2008
- Messages
- 16,985
- Tractor
- Kubota L3830GST, B7500HST, BX2660. Formerly: Case 480F LL, David Brown 880UE
Sorry, that should have said that they have the same number of watts, not the same number of amps.
Aaron Z
MinnesotaEric
Super Member
Maybe so, but Snap-On is sending me a $120 hammer. A One-Hundred-Twenty-dollar Hammer.
I may frame it and put it on display.
hunt4570
Elite Member
- Joined
- Feb 10, 2015
- Messages
- 4,057
- Location
- South Carolina
- Tractor
- Grand L3540 ,724 loader, bucket, grapple and now forks also! And just for OP.. a pool!
Maybe so, but Snap-On is sending me a $120 hammer. A One-Hundred-Twenty-dollar Hammer.
I may frame it and put it on display.
$120 hammer??? Sounds like government tool prices!:laughing:
MinnesotaEric
Super Member
Image the cost if Snap-On made a toilet seat? LOL!
hunt4570
Elite Member
- Joined
- Feb 10, 2015
- Messages
- 4,057
- Location
- South Carolina
- Tractor
- Grand L3540 ,724 loader, bucket, grapple and now forks also! And just for OP.. a pool!
I wouldn't be able to afford to s......
- Joined
- Feb 21, 2003
- Messages
- 26,962
- Location
- SE Michigan in the middle of nowhere
- Tractor
- Kubota M9000 HDCC3 M9000 HDC
hunt4570
Elite Member
- Joined
- Feb 10, 2015
- Messages
- 4,057
- Location
- South Carolina
- Tractor
- Grand L3540 ,724 loader, bucket, grapple and now forks also! And just for OP.. a pool!
You'd be squatting over a hole in the floor....
Oooo Chinese style!
Gary Fowler
Super Star Member
- Joined
- Jun 23, 2008
- Messages
- 11,917
- Location
- Bismarck Arkansas
- Tractor
- 2009 Kubota RTV 900, 2009 Kubota B26 TLB & 2010 model LS P7010
Not really Harbor Freight tool that doesn't suck, but while looking at drill presses(I did buy the cheap HF one) and other tools, I found that Walmart no longer handle Black and Decker tools. They now have a new line exclusive to Walmart (according to the Hart rep I spoke to) called HART. They are blue in color, cost about the same or more than B&D and only use Hart battery packs (no surprise there). They seem to follow Dewalt and others with supplying tools with no battery and according to the rep, many folks already have battery(ies) and thus only want the tool. This is not likely when they first start selling a tool line and I told her so. I was looking for a 20v sabre saw, the Hart one was $55 but 1 battery and charger was another $60, a little less than a Craftsman that I priced in Lowes which had 2 batteries and a charger for $150 but their saw was $75.
I did finally find a Black and Decker set at Lowes that included a sabre saw, a 5 1/2" skill saw, a drill and a LED light and 2 batteries and charger for $175. The main reason I went with the B&D is because I already have several chargers and batteries to fit drills and even a weed eater( that I dont use). I didn't need any more drills since I have 5 already but I had been wanting a small skill saw and buying one and a sabre saw would have been about the same price (more if getting other brands like Ryobi or Craftsman and would still have to buy $150 worth of batteries.
I have generally had good service from Black and Decker tools so I am sticking with them for now. I wont be trying out the new HART line anytime soon for sure. One thing I have noticed about HF tools is that they are getting more and more expensive, now nearly in line with name brand high quality tools at other stores. Anyone else see that trend in their stores?
I did finally find a Black and Decker set at Lowes that included a sabre saw, a 5 1/2" skill saw, a drill and a LED light and 2 batteries and charger for $175. The main reason I went with the B&D is because I already have several chargers and batteries to fit drills and even a weed eater( that I dont use). I didn't need any more drills since I have 5 already but I had been wanting a small skill saw and buying one and a sabre saw would have been about the same price (more if getting other brands like Ryobi or Craftsman and would still have to buy $150 worth of batteries.
I have generally had good service from Black and Decker tools so I am sticking with them for now. I wont be trying out the new HART line anytime soon for sure. One thing I have noticed about HF tools is that they are getting more and more expensive, now nearly in line with name brand high quality tools at other stores. Anyone else see that trend in their stores?